Primes substrates beneath ATLAS thin-coat renders – mineral, acrylic, acrylicsilicone and mosaic DEKO M.

Improves bonding – strongly bonds to substrates and applied renders.

Limits substrate absorptiveness – prevents excessive water transfer from freshly applied renders into substrates.

Facilitates application of subsequent coat – rough surface reduces “slip” of the applied render.

Forms temporary protective layer for a façade – protects non-rendered façade against weather conditions within half a year.

• Contains aggregate – improves bonding owing to significant broadening of the effective surface between layers (forms rough surface).
• Protects substrates against adverse effects of the new coat – forms chemical barrier between substrate and render, limits their interaction – reduces colour penetration from substrates and occurrence of stains on the render surface.
• High bonding – min. 1.0 MPa for concrete.
• Increases adhesion - adheres strongly to the substrate and to the renders being applied.
• Reduces the absorbency of the substrate - prevents water from freshly applied renders from being released too intensively into the substrate.
• Facilitates the application of the next layer - the rough surface reduces the slip of the applied render.
• It is available in 7 colours:
- white,
- brown,
- clinker,
- graphite,
- sand,
- grey,
- coffee.

The primer can also be tinted in mixers to 400 colours according to the SAH Colours of Renders and Paints. Recommendations for ATLAS CERPLAST colours under ATLAS DEKO M renders can be found in the Technical Sheets of these renders.

On average, 0.3 kg of mass is used per 1 m².

Plastic buckets 5 kg, 10 kg, 15 kg, 25 kg.